Austrian engine developer Frauscher Motors has developed a biomass-based combined heat and power (CHP) system that converts heat from a wood-pellet boiler into electricity using a compact Stirling generator.
The company said it has been operating a demonstration system since the end of March 2026 to evaluate heat transfer, automatic cleaning and long-term operating stability.
“We have demonstrated a maintenance-free operating time of 10,000 hours using natural gas as fuel. Long-term tests are ongoing with a view to extending this period,” the company’s CEO, Josef Frauscher, told pv magazine.
“One of the aims of the biomass research project is to determine the long-term durability of the heat exchanger, which is exposed to the flow of hot flue gas. Our goal is to achieve service lives comparable to those achieved when operating on natural gas,” he added. “Assuming 2,000 hours of operation per heating season and an average utilisation rate of 75% of the rated output, 1.5 MWh can be generated.”
At the center of the installation is Frauscher’s Gen70 Stirling generator, which converts externally supplied heat into mechanical energy and subsequently electricity. The 29 kg unit uses the company’s patented Alphagamma Stirling engine configuration and operates without lubricating oil.
According to measurements conducted in January 2025, the Gen70T delivered 1,201 W of electrical output from approximately 4,256 W of supplied thermal power, corresponding to an electrical efficiency of 28.2%. The test also recorded approximately 2.92 kW of cooling heat output, which can be recovered for heating applications.
The generator produces approximately 800 W at a heater-head temperature of 500 C and reaches its highest reported efficiency at around 660 C.
Source link







