Chinese PV manufacturer Longi launched its Hi-MO X10 Full-Screen Triple-Protection PV module on Nov. 17 at an industry event in Qingdao, China. The module features a front-side light-receiving area ratio of 98.58%, the highest the company has achieved in a commercial product.
The module retains the standard 2,382 mm × 1,134 mm dimensions of Longi’s existing Hi-MO X10 lineup for distributed PV applications, while increasing the light-receiving area by 759.3 cm² through four structural modifications.
Longi said it eliminated 20 white gaps between cells using a low-temperature film-welding process that bonds the cells at ambient temperature before a low-heat lamination step. The process reportedly limits the resulting height difference to 130 micrometers and recovers 178 cm² of light-receiving area.
The company also relocated three front-side busbars to the rear of the module, adding another 294 cm². According to Longi, thinner busbar profiles and staggered positioning help mitigate the risk of microcracks associated with rear-side busbar stacking. The remaining modifications include reducing inter-string spacing from 1.48 mm to 1 mm and cutting the cell-to-frame creepage distance from 12.9 mm to less than 9 mm through the use of upgraded insulation materials.
The module delivers a maximum front-side power output of 680 W and a conversion efficiency of 25.2%. Its standard power rating for volume production is 670 W, which Longi claims is 20 W higher than that of mainstream TOPCon modules of the same size.
To address additional rear-side shading caused by the relocation of the busbars, Longi replaced flat ribbons with round-wire ribbons, introduced precision-insulated sub-busbar break points, and developed an alloy frame profile designed to prevent the frame’s C-shaped section from shading the cells.
Source link







