The battery on the Pixel Tag is rated for about a year, but what happens when you need to replace it? Here’s how to replace it.

Due to the shape and design of the Pixel Tag, you might have a bit of difficulty getting the backplate off quickly to throw in a new battery when it’s time.

Having had a few problems myself (yes, a me problem most likely) due to the slick, smooth shape, I figured that, even though it might insult the intelligence of many, the process was at least documented so that anyone having issues has a reference to come to if they’re struggling to get that backplate off.

You will have difficulty if you try to do this one-handed. Instead, clasp the Pixel Tag with one thumb at the base or midframe, then with your other thumb twist anticlockwise until the backplate comes loose and the battery will drop out.

The first time you do this, it will be harder due to the tight factory seal. However, once it’s open, the process gets easier to replicate. Here’s a little demonstration of how to get it off without it slipping and being flung into the ether:

Be aware that you may need to open and reseat the battery if Find Hub does not recognize the Pixel Tag again when you’ve done this. Even with the factory-supplied battery, it can misalign if you don’t place it in the correct position and fully close the door when reassembling.

If you’re wondering what type of battery you need, CR2032 are the standard for watches and most Android trackers.

Source link